Link Logger Home ZyXel Banner Binary Visions
Netgear
LinkSYS
Router

VersaLink Setup
Link Logger for Windows
Home Home Product Info Product Info Download Download/Purchase Support Support  
Link Logger for Windows

NewsLatest News

Screen ShotsScreenshots

Customer CommentsFeedback

Common ScansScans

Additional ResourcesResources

Westell VersaLink 327W 

Link Logger Set Up

 

1.Download and Install Link Logger

2. Next Configure Link Logger

 

To find this screen select 'Edit' from the main menu and then select the 'Setup...' option and click on the 'Router' tab.  The Router Address is the internal LAN IP address of your VersaLink 327W (192.168.1.1 by default).

 

3. Configure the VersaLink 327W to send out logging infomation to Link Logger

In the 'Remote Logging' section enter the LAN IP address of the system running Link Logger into the 'Remote IP Address' and Enable Remote Logging.

 

 

3. Configure the VersaLink 327W to log traffic.

Of course your exact settings may differ depending on your logging requirements.

 

FAQ for Install Issues

  • If you get an error when starting Link Logger, please make sure that you don't have other logging software running when you start Link Logger, as only one application can process Syslog messages at a time.

  • If Link Logger doesn't work and your running ZoneAlarm or any similar product please ensure that it is allowing communication between Link Logger and your Linksys Router.  Link Logger does attempt to ping your router on startup, and your Linksys Router sends its logging information to Link Logger via Syslog messages (UDP port 514).  If the ping is blocked then Link Logger displays a message stating that it couldn't communicate with the Router.  If the Syslog messages are blocked then Link Logger doesn't log anything as it doesn't receive any logging information.

  • Link Logger does have an uninstall program for easy removal.  You can remove Link Logger using 'Remove Programs' in the Windows Control Panel.

 

If Link Logger is still not working email Link Logger Support